How to set and maintain the correct level of bromine in a jacuzzi

Table of contents:

How to set and maintain the correct level of bromine in a jacuzzi
How to set and maintain the correct level of bromine in a jacuzzi
Anonim

It can be very easy to saturate and maintain bromine water for a spa or hot tub. To do this, follow our simple steps!

Steps

Set up and Maintain Spa Water Bromine Step 1
Set up and Maintain Spa Water Bromine Step 1

Step 1. First, do a basic water test to find out what needs to be done to balance its components

You will need to test the pH level, alkalinity and calcium hardness of the water. There are special kits for testing at home, but you can also take a water sample to your local pool or spa and ask for a test.

Set up and Maintain Spa Water Bromine Step 2
Set up and Maintain Spa Water Bromine Step 2

Step 2. Set the required level of water alkalinity

1.6-2.4 mEq / L would be ideal. This will help maintain the same pH level. I recommend Bio-Guard Water Alkalinity Booster. The bottles say how much you need to add, and if you did a water test in an institution, they will tell you exactly how much is needed.

Set up and Maintain Spa Water Bromine Step 3
Set up and Maintain Spa Water Bromine Step 3

Step 3. The PH level should be 7.4-7.6

I recommend Bio-guard products for raising or lowering the PH level. For most hot tubs, you only need a few tablespoons of this product.

Set up and Maintain Spa Water Bromine Step 4
Set up and Maintain Spa Water Bromine Step 4

Step 4. The calcium hardness of the water shows how much dissolved calcium there is in your water

If the hardness is too high, calcium will be deposited on laundry and equipment. Too low calcium will corrode your equipment. The ideal level is 150-250. If your water is too hard, you can use Stain & Scale products to protect your equipment. If the water is too soft, you can use Bio-Guard Calcium Hardener.

Set up and Maintain Spa Water Bromine Step 5
Set up and Maintain Spa Water Bromine Step 5

Step 5. Once you have balanced these numbers, you can add bromine

If you are using tablets, I recommend adding 2-3 things to the water and intensifying the effect with 2 teaspoons of concentrated bromine powder. This will be a good supply for your water.

Set up and Maintain Spa Water Bromine Step 6
Set up and Maintain Spa Water Bromine Step 6

Step 6. You will also need to purify the water with a chlorine-free product such as Bioguard Spa Shock

This way you get rid of the pollutants.

Set up and Maintain Spa Water Bromine Step 7
Set up and Maintain Spa Water Bromine Step 7

Step 7. Now that your water has met the necessary indicators, how to maintain them?

Set up and Maintain Spa Water Bromine Step 8
Set up and Maintain Spa Water Bromine Step 8

Step 8. Every week you will need to disinfect the Jacuzzi

Add 2-3 tsp. chlorine-free disinfectant with the jets on and wait 15 minutes. AFTER THIS, test the water for bromine, pH and alkalinity using a test kit or strips. In general, the bromine level should be 3-5 ppm. You can observe higher readings immediately after disinfection. Do not worry! Keep the alkalinity within the acceptable range and the PH will be more or less stable.

Advice

  • Learn the difference between chlorine and bromine in a hot tub to understand how the latter works. This can save you a lot of money in the long run!
  • If you are new to hot tub and water testing, you can do the test at home and take the water sample to a professional to test for himself. This will help you keep your water clean, learn, and benchmark.

Warnings

  • If your water looks or smells unusual, take a sample to a professional. Good water will NEVER stink like dirty socks, have a brownish or green tint, and it will not itch or inflame your skin.
  • Do not use CHLORINE AND BROMINE in the same water. They can react with each other. Be sure to buy a chlorine-free disinfectant.

Popular by topic