How to replace the water filter in your Kenmore refrigerator

Table of contents:

2023 Author: Martin Macey | [email protected]. Last modified: 2023-05-21 06:41

Modern Kenmore refrigerators have a water filter, with which filtered water flows from the tap. Having one of these refrigerators will require you to replace this filter after a certain amount of time to keep the water clean and the refrigerator to work efficiently. Kenmore refrigerators are manufactured by Amana, Frigidaire, GE, LG and Whirlpool, so it is very important to know which manufacturer made your refrigerator so that you can order the parts you need. Filters in Kenmore refrigerators are located at the bottom, on the front of the refrigerator. This article will show you how to replace the water filter in your Kenmore refrigerator.

Steps

Change a Water Filter in a Kenmore Refrigerator Step 1

Step 1. Find out the manufacturer's name to find out the model number of the refrigerator

Read the instructions or search the Internet.

Change a Water Filter in a Kenmore Refrigerator Step 2

Step 2. Order your filter online or by calling the recommended filter replacement number listed in the instructions

There will be different brands of filters available for you to choose from, such as Pur and Brita.

Change a Water Filter in a Kenmore Refrigerator Step 3

Step 3. Remove the filter from the box and the lid caps from the end of the filter

They are put there for the safety of the goods during transportation. They are often made in bright colors so you can distinguish them from the filter.

Change a Water Filter in a Kenmore Refrigerator Step 4

Step 4. Move down to the filter so that you are flush with the grill that is on the front bottom of the refrigerator

Change a Water Filter in a Kenmore Refrigerator Step 5

Step 5. Press the button next to the round cap on the grill

The filter should come off.

Change a Water Filter in a Kenmore Refrigerator Step 6

Step 6. Remove the filter from the grill

Change a Water Filter in a Kenmore Refrigerator Step 7

Step 7. Turn the cap counterclockwise to remove it from the old filter

Change a Water Filter in a Kenmore Refrigerator Step 8

Step 8. Insert the new filter into the cap and turn it clockwise

Change a Water Filter in a Kenmore Refrigerator Step 9

Step 9. Make sure the words on the filter point in the correct direction, then insert the new filter inside the grill

Change a Water Filter in a Kenmore Refrigerator Step 10

Step 10. Press on it until you hear a characteristic click

Change a Water Filter in a Kenmore Refrigerator Step 11

Step 11. Rinse the filter to avoid creating an air lock

Place the bucket under the tap and press the button for 5 seconds, then release it for 5 seconds. Repeat this process until water starts to flow, continue doing this for another 2 minutes

Change a Water Filter in a Kenmore Refrigerator Step 12

Step 12. Use water from the Kenmore refrigerator

Advice

Change the water filter every 6 months to keep the water clean.
If the filter does not work after trying to flush it, make sure the transport caps have been removed from the filter. If the filter is still not working, it is possible that your water supply is frozen or the water supply valve is broken. If so, you will have to call a repairman.