Metal aprons impress with their resistance to damage. However, they also need regular cleaning so that ugly stains do not remain on the surface. First, try rinsing off the stain with clean water. Stubborn stains should be treated with soapy water, baking soda or vinegar. After cleaning, rinse the surface with water and wipe dry to ensure it always looks good.
Steps
Method 1 of 3: Regular stains
Step 1. Determine the direction of the metal particles
Take a closer look at the metal apron. On its surface, the metal texture can be located in a certain direction, for example, across. If the texture is very noticeable, then always wash the apron in the direction of the particles. This prevents scratches on the surface.
Step 2. Soak a microfiber cloth in warm water
Use a microfiber cloth or non-abrasive sponge. Metal brushes and scouring pads can scratch your apron, so don't use such materials. With regular cleaning with warm water, the surface of the apron will almost always remain clean. Do not use hot water.
For added effectiveness, you can add one to two drops of a mild detergent, such as dishwashing liquid or chlorine-free detergent, to warm water
Step 3. Wash off stains with a tissue
Use a microfiber cloth to clean the apron. Work in circular motions along the terrain. As a rule, fresh stains are easy to clean. Older dirt may require deeper cleaning.
Never use metal brushes or scouring pads to avoid scratching the apron
Step 4. Dry the apron with a clean cloth
Take a dry cloth and scoop up the water from the surface. The metal apron is resistant to damage, but hard water can weaken the material. Do not leave the surface wet. Wipe the apron dry with a tissue.
Method 2 of 3: Persistent Contamination
Step 1. Prepare a solution of baking soda and warm water
Mix 200 grams of baking soda and a glass of warm water. Stir to make a paste.
Step 2. Apply the paste to the stain and leave to dry
Apply the paste to the stain with a tissue or sponge. Wait for the paste to dry. Take a clean, dry cloth and wipe the paste off the apron. Make sure the stain is gone.
Step 3. Prepare a solution of water and vinegar
Mix equal parts vinegar and warm water. Pour into a container with a spray to evenly apply the required amount of solution to contaminants.
Step 4. Leave the vinegar solution for five minutes
Spray the solution over the stain. Five minutes later, the vinegar solution can be washed off.
Step 5. Collect the vinegar with a damp cloth
Soak a soft cloth in warm water, then work the stain against the texture of the metal. Collect all the vinegar.
Step 6. Dry the apron with a clean cloth
Collect water from the surface with a clean cloth. The apron must be kept dry so that the water does not destroy the metal.
Method 3 of 3: Caring for your metal apron
Step 1. Remove stains immediately
Use paper towels to remove grease and food debris. If you get rid of the dirt right away, the stain will not dry on the surface. Over time, acidic foods like tomato sauce and lemon juice can damage the metal, so it's best not to hesitate.
Step 2. Remove fingerprints with a glass cleaner
Choose a chlorine-free cleaner or a multi-purpose window cleaner. Use it between surface cleanings to remove minor smudges like prints. Spray the liquid onto the metal surface of the apron. Remove stains with a tissue and scoop up excess liquid or wait for it to dry.
Step 3. Polish the metal with olive oil
Dab a tablespoon of olive oil on a napkin to add an extra shine to the metal. Polish the apron for a few minutes along the texture of the metal. Leave the oil on to protect the apron from stains for several weeks.
You can also use a special polish for metal, but olive oil will not be inferior in efficiency, but it will cost less. Also try using baby oil
Advice
- Remove stains along the metal texture. Thanks to this, small scratches will not appear on the surface, in which bacteria are retained.
- Do not clean the metal apron with a stiff washcloth or wire brush. Use only soft sponges or microfiber cloths.